Revision Launch Checklist: Difference between revisions

From MC Public Wiki
Jump to navigation Jump to search
Line 84: Line 84:
* Build the spawn
* Build the spawn
* Build roads leading out of spawn
* Build roads leading out of spawn
* Import builds coming from other servers (such as spawns built on test servers, or builds from contests)
** All nerd servers share a symbolic schematic folder, so a schematic saved on one can immediately be accessed from another. Procedure:
*** Select the region you want to turn into a schematic with the WorldEdit tool.
*** Type //copy, then //save (schematic name).
*** Go to the server where you intend to put the schematic, and stand in the spot (relative to where you copied/saved) that you want it placed.
*** Type //load (schematic name), then //paste.
*** Type //undo if you need to try again.
** Remember - very large schematics can and WILL crash the server, preventing you from //undo'ing a bad paste! Be careful, and consider splitting up your schematic into smaller ones.
** Double-check all builds inside and out to make sure they are appropriate for the new map (e.g., chests full of loot that are supposed to be empty), especially from build contests.
* Create protections
* Create protections



Revision as of 18:56, 12 June 2013

The purpose of this page is to create a checklist of things that need to happen every time a new revision is launched.

Patch Updates

These steps need to be taken every time a new major Minecraft patch is released. (Everything here is accurate as of the 1.5 release patch.)

Infrastructure

  • Make sure CraftBukkit is updated (we usually wait for at least a beta build, if not recommended): http://dl.bukkit.org/downloads/craftbukkit/
  • Update NerdBukkit (used on Creative only)
  • Update wrappers
  • Make sure every server has the proper configuration of fully-updated plugins (see below)
  • Decide how various features of new patch will be implemented (fully enabled; enabled with restrictions; disabled; etc.)

Nerd-developed Plugins

The following chart shows which plugins developed by this community are used on each server. They each need to be updated and tested extensively (on temp chaos or some other temp server) for the new patch.

Plugin C P S
CommandBlock X X X
CommandHelper X X X
KitchenSink X X X
LolNo X X X
MCBouncer X X X
MobLimiter X
ModMode X X X
ModReq X X X
NerdMessage X X X
NerdSpawn X X X
NoLog X
PlumpXP X
removeframes X
SafeBuckets X X
TPControl X X X

Non-Nerd-developed Plugins

The following chart shows which plugins NOT developed by this community are used on each server. For these, we generally need to either wait for the plugin to be updated for the new patch, then test it extensively (on temp chaos or some other temp server) for the new patch. If the plugin is relatively simple and not critical to operation, it might be sufficient to try running the existing version of the plugin on the next patch.

Plugin C P S
bPermissions X X X
LogBlock X X X
LWC X X
NoCheatPlus X X X
ProperTime X X X
WorldBorder X X X
WorldEdit X X X
WorldGuard X X X

Revision Launches

These steps should be taken every time a new revision is launched.

Map Building

  • Build the map
  • Build the spawn
  • Build roads leading out of spawn
  • Import builds coming from other servers (such as spawns built on test servers, or builds from contests)
    • All nerd servers share a symbolic schematic folder, so a schematic saved on one can immediately be accessed from another. Procedure:
      • Select the region you want to turn into a schematic with the WorldEdit tool.
      • Type //copy, then //save (schematic name).
      • Go to the server where you intend to put the schematic, and stand in the spot (relative to where you copied/saved) that you want it placed.
      • Type //load (schematic name), then //paste.
      • Type //undo if you need to try again.
    • Remember - very large schematics can and WILL crash the server, preventing you from //undo'ing a bad paste! Be careful, and consider splitting up your schematic into smaller ones.
    • Double-check all builds inside and out to make sure they are appropriate for the new map (e.g., chests full of loot that are supposed to be empty), especially from build contests.
  • Create protections

Technical Steps

  • Take backup of previous map, and upload it to nerd.nu/backups
  • Use previous map backup to generate and post a final cartograph
  • Clear databases from previous revision
    • CommandHelper (warps, etc.)
    • ModReq
    • SafeBuckets
    • LogBlock
    • LWC
    • WorldGuard (protections)
  • Pre-generate all map chunks (if it's a custom map, you shouldn't need to do this)